TOP GUARD is a low-maintenance, super-high gloss, slip-resistant Floor Treatment which eliminates burnishing dust and frequent stripping of acrylic floor surfaces. The use of TOP GUARD eliminates all other floor care products. There is no need for all-purpose cleaners, de-greasers or strippers… ever! You will no longer need spray buffs or burnishing agents. Only one buffing pad is used with any ultra-high-speed machine. Regular high speed buffing with TOP GUARD produces a barrier that insulates the floor from the floor pad. The result is a floor finish, which is 20 to 30 times more durable, cleaner, brighter and safer than ever before. TOP GUARD is recommended for use in all high-traffic retail and commercial environments.

Directions For Use

For best results, TOP GUARD should be damp mopped on, after thoroughly stripping the floor with SCL SUPER STRIP and after re-coating with 2-3 coats of SCL’s ProSeal, ProGloss Premium, One-Step, or your favourite floor finish. TOP GUARD can also be applied directly over your current floor finish or acrylic sealer. Directions After a wait of one night (24 hours) following the initial application of your initial floor finish treatment, apply TOP GUARD by damp-mopping at a dilution rate of 3 ounces per gallon of clean water.

Allow to dry, then buff with SCL’s Microtron™ PL Beige Poly Thermal floor pad and any ultra-high-speed machine (1500 RPM or higher). On the Second and Third night, follow the same procedure. Beginning on the Fourth night, dilute TOP GUARD at a rate of 2 ounces to one gallon of clean water (never more).

Floors should now have that mirror gloss and show excellent slip-resistance. Maximum gloss will be achieved at the one-week mark and your floor should stay this way, given regular TOP GUARD maintenance. You should never need to strip again. Spray Buffing Need a quick fix to a worn or badly scratched area? Simply mix 2-3 ounces in a spray bottle and burnish away your problems.

Technical Data & MSDS

TOP GUARD Technical Data

TOP GUARD MSDS Data