Suitable for use under static and seismic loading conditions in cracked and uncracked concrete and masonry. Ideal for general doweling and threaded rod applications. A two-component, high-solids, epoxy-based system ideal for general anchoring of threaded rod and rebar into concrete (cracked and uncracked) and masonry (cracked and uncracked).

Type

Chemical

Size & Yield

Available in 22oz and 10oz Cartridges.

Chemical Anchors Overview

Chemical or resin anchors are generic terms relating to steel studs, bolts and anchorages which are bonded into a substrate, usually masonry and concrete, using a resin based adhesive system. Ideally suited for high load applications, in virtually all cases the resulting bond is stronger than the base material itself and as the system is based on chemical adhesion, no load stress is imparted to the base material as with expansion type anchors and are therefore ideal for close to edge fixing, reduced centre and group anchoring and use in concrete of unknown quality or low compressive strength.

Although there are many differing variations and delivery systems in the market, all systems operate using the same basic principle with the base resin, requiring the introduction, by mixing, of a second component to begin the chemical curing process, hence the term chemical anchor.

Technical Data & MSDS

Simpson ET-3G Technical Data

SimpsonET-3G MSDS