QUARRY GLAZE is a urethane modified acrylic emulsion and sealer for clay pavers and porous quarry tiles, specially formulated with a blend of polymers designed to give optimum performance under the most demanding conditions.

QUARRY GLAZE is hard-wearing and resistant to ultra violet damage, and will not yellow, crack or peel when applied correctly.

QUARRY GLAZE is also ideal for use as a sealer and polish for use on Terrazzo and concrete surfaces.

Directions For Use

PREPARATION: Like all coatings, the preparation is the most important part of application. The substrate must be totally clean and free from all traces of oils, grease, lards, diesel fuel, dirt, dust, cement droppings etc,. To remove traces of hardened cement, efflorescence the use of SCL “QUARRY CLEAN”, and to clean the floor of other contaminants we recommend the use of SCL “TRIPLE”. The substrate must be rinsed thoroughly after cleaning to remove all traces of the cleaning compounds or their residues. Improper preparation will affect the bond and may result in peeling or flaking of the coating.

APPLICATION: On to the clean & dry surface mop QUARRY GLAZE using a clean but used mop. ( New mops drop strings) Apply QUARRY GLAZE in thin even strokes, each one overlapping the former. Several thin coats are required allowing each to dry completely before application of another. Avoid over application or ponding of QUARRY GLAZE MAINTENANCE: In order to keep it’s look for as long as possible regular mopping with water or water with a mild detergent is all that is required. Do not use Harsh detergents or strippers as this will damage the coating. QUARRY GLAZE can be removed with SCL “SPEED STRIPPER”.

Technical Data & MSDS

QUARRY GLAZE Technical Data

QUARRY GLAZE MSDS