KONKLEEN is a combination of acid based material, corrosion inhibitors and dispersing agents.

It is used for the removal of mortar and plaster runs, droppings and stains from brickwork and concrete surfaces.

Also used for the removal of hardened concrete from tools and equipment or rust and mill scale from steelwork and for cleaning concrete or clay tile floorings.

Directions For Use

A small trial area should be cleaned first to determine the suitable dilution.

CLEANING BRICKWORK
Pre-soak brickwork with water. Using a sponge, rub the affected area with a dilution of one part Konkleen to one part Water, according to the severity of the deposits. When the reaction has stopped, wash down area with clean water.

REMOVING HARDENED CONCRETE FROM MACHINERY AND EQUIPMENT
For large equipment, Ready-mix trucks, concrete barrows, etc. Liberally apply with soft broom to the deposits and leave overnight if possible. Prior cracking of the surface with the deposit will assist penetration and speed up the operation. Considerable deposits may require further treatment with Konkleen. After treatment, dissolved deposits and loose, insoluble materials can be brushed and washed away with clean water.

For small equipment, soak overnight, then wash with clean water. For steel posts and stanchions, etc., dilute one to one with water and pre-soak area, brush clean and rinse with clean water. Repeat if necessary.

CLEANING FLOORS
Pre-soak floor with water. Using a stiff bristled broom, agitate the affected areas with a dilution of one part Konkleen to one part water, accordingly. When reaction has stopped, wash floor well with clean water.

Technical Data & MSDS

Konkleen Technical Data

Konkleen MSDS