|PRODUCT||OVERVIEW||DIRECTIONS FOR USE||TECHNICAL DATA & MSDS|
|PROTAIN NC||Protain NC is a powerful neutral type cleaner and deodoriser for all surfaces. It can be used on all types of hard surfaces in a wide range of industries including offices, schools, churches, hospitals, nursing homes, etc.||When used as a neutral cleaner for regular maintenance on polished floors dilute 1:10 with cool, clean water. Mop floor with this solution. Remove dirt with a squeegee or damp mop. Rinse floor if desired. For light duty was removal, mix 20 oz. Protain NC to 1-gallon hot water. Apply generously to floor and let soak for 10 mins. Scrub with soft brush or mop and rinse thoroughly. For light duty was removal, mix 20 oz. Protain NC to 1-gallon hot water. Apply generously to floor and let soak for 10 mins. Scrub with soft brush or mop and rinse thoroughly.||Protain NC Technical Data
Protain NC MSDS
|PROTAIN SPEED STRIPPER||Protain Speed Stripper is an industrial grade, concentrated emulsion floor stripper that dissolves polishes and finishes leaving little or no residue.||Ensure that adequate ventilation is provided. In confined areas use respirators approved for “Organic Vapours”. Dilute SPEED STRIPPER up to 5 : 1 with clean water. Warm water will speed up the performance, especially on hard, old and burnished surfaces. Mop the diluted solution on to the area to be stripped & let stand for a few minutes, followed by an application of a stripping machine using a red or black pad if necessary. NOTE:- it is always advisable to test a small inconspicuous trial area before general application||Protain Speed Stripper Technical Data|
|QUARRY CLEAN||Quarry Clean is a combination of Hydrochloric acid and special surfactants blended especially for use with quarry (clay) tiles and clay pavers, for the removal of lime, cement and water stains.||Quarry Clean is supplied as a concentrated material and should be diluted with clean water according to requirements. Cement stains and Motor droppings up to 1:5 Lime stains and Efflorescence up to 1:5 Water stains up to 1:10 General concrete cleaner up to 1:10 The diluted Quarry Clean should be applied onto a dry floor liberally with a mop or suitable implement. After foaming action has stopped, agitate with a scrubber or yard broom, this will remove any residual stains. |
Rinse or flush floor completely, do not allow product to dry on floor. Ensure that the rinsing is done from one direction to another, so that dissolved material does not redeposit onto clean floor.
|Quarry Clean Technical Data
Quarry Clean MSDS
|SCL SUPER-STRIP||SCL Super Strip is an industrial grade, concentrated emulsion floor stripper that dissolves the heaviest build-up of polishes and finishes, leaving little or no residue.||Ensure that adequate ventilation is provided. In confined areas, use respirators approved for “organic vapours”. SCL SUPER-STRIP can be used to effectively remove heavy build-up of floor finishes from vinyl, terrazzo, concrete, rubber, non-glazed ceramic and quarry tile. For the most rapid results, an automatic floor scrubber should be used.||SCL Super Strip Technical Data|
|TRIPLE||Triple is a concentrated alkali based cleaner, degreaser and floor finish stripper. TRIPLE is specially formulated for use in the industrial maintenance and petrochemical industries.|
TRIPLE is approved by the Ministry of Energy and Energy Industries for use in the Petroleum Industry.
|As a cleaner or degreaser, dilute TRIPLE up to 15:1 with water and apply liberally on the surface to be cleaned. Let stand for a few minutes and agitate with a stiff brush of broom. Rinse off with clean water. As a floor stripper, dilute TRIPLE 4:1 with hot water and apply liberally .Let stand for five minutes and strip using a black pad.||Triple Technical Data