Grouts are becoming increasingly recognised as versatile construction materials, with widespread applications in areas where traditional methods of construction prove to be too cumbersome or costly. They are flexible in the sense that the properties of a grout for a particular application can be tailored specifically to satisfy ground conditions, curing times and other critical parameters.
|PRODUCT||DESCRIPTION||TYPE||SIZE & YIELD||DATA SHEET|
|Cebex 100||Cebex 100 is supplied as a powder admixture. The material is a combination of a plasticising agent and a gas producing expansion medium. The plasticising agent allows the use of a reduced water/cement ratio with consequent increased strengths and durability. The expansive medium counteracts the natural settlement and plastic shrinkage of the grout and aids stability and cohesion.||Grout Admixture||Supplied in 5 kg packages & 225 g tins yielding approximately 36-57 litres per 225 g tin.||Cebex 100 Technical Data|
|Conbextra EPR||CONBEXTRA EPR is a three part 100% solids epoxy grout, designed for free flowing dynamic grouting where a variety of grout thicknesses will be encountered.||Epoxy||8 litre, 16 and 30 litre three part packs.||Conbextra EPR Base Technical Data
Conbextra EPR Filler Technical Data
Conbextra EPR Hardener Technical Data
|Conbextra GP||CONBEXTRA GP is a general purpose cementitious grout. It can be used from a free flow to a dry pack consistency with only a variation of the water content.||General Purpose||25 kg bags yielding 12.5 to 13.5 litres per bag.||Conbextra GP Technical Data|
|Conbextra HF||CONBEXTRA HF is a high performance dual shrinkage compensated cementitious grout. It is a premium product used for free flow grouting over a range of application consistencies.||High Flow||26 kg bags yielding 12.5 to 13.5 litres per bag.||Conbextra HF Technical Data|
|Conbextra TS||CONBEXTRA TS is a high performance dual shrinkage compensated cementitious grout. It is a premium product used for free flow grouting of thick sections up to 500mm thick, over a range of applications.||Thick Section||27 kg bags yielding 12.5 to 13.5 litres per bag.||Conbextra TS Technical Data|
|Conbextra UW||CONBEXTRA UW is used for free flow or pumped grouting applications underwater or in tidal zones. It is designed to give no significant “wash out” in the cement phase. Applications include bridge columns, quay pillars, concrete piling, slipways and dams.|
CONBEXTRA UW is a blend of cement, graded fine aggregate and chemical additives which impart controlled expansion, water reduction and non “wash out” characteristics. The aggregate grading minimises segregation and bleeding whilst assisting the flow characteristics.
|Under Water||25 kg (moisture resistant) bags yielding 14.5 litres.||Conbextra UW Technical Data|