Corrosion Control Overview

Corrosion control products are used to galvanically protect steel reinforcement and thereby avoid future problems associated with the formation of incipient anodes. These products actively resist corrosion within the confines of the repair location and avoid the generation of incipient anodes in immediately adjacent locations.

PRODUCTDESCRIPTIONTYPESIZE & YIELDDATA SHEET
Galvashield CCGALVASHIELD CC is a discreet galvanic anode embedded within a specially formulated cementitious mortar, used to control corrosion in sound but contaminated concrete.AnodeCC 65: 65 mm long x 45 mm wide CC 45: 45 mm long x 45 mm wideGalvashield CC Technical Data
Galvashield LJGALVASHIELD LJ is designed to reinstate and actively protect reinforced concrete/ structural steel elements subject to the most severe exposure conditions.Zinc Mesh / JacketEach Galvashield LJ assembly is supplied prefabricated ready to use, in accordance with prior dimensions received from the project.Galvashield LJ Technical Data
Galvashield XPGALVASHIELD XP is a sacrificial metal anode embedded within a specially formulated cementitious mortar, which prevents incipient anode induced corrosion around the boundary of patch repairs.Anode64 mm wide x 27 mm thick 20 units per pack.Galvashield XP Technical Data
Nitoprime ZincrichNITOPRIME ZINCRICH is the required anti-corrosion primer for use with the Renderoc concrete repair system.Anti Corrosion PrimerAvailable in 1.0 and 2.5 litre tins. Coverage about 7.5 sq. m/litre.Nitoprime Zincrich Technical Data